The ironware I made shines

Chapter 265

Chapter 265

The next day, a new round of competition is about to begin. Ge Xiaohua and Yamamoto Masaosu have gone through half a month of fierce confrontation. They seem to be doing their own things, but in fact, the intensity of fighting is not worse than real swords and guns. Every movement, Eyes and steps are all tricks.

"What should we do today? Grinding and polishing?" Ge Xiaohua's knife blank was successfully clamped with steel yesterday and hammered into one. The prototype of the knife blank has come out, but it needs to be quenched and then polished.

"Quenching first!" Ge Xiaohua clamped the knife embryo into the furnace and heated it to a suitable temperature. Because of the lack of experience in making seedling knives, the quenching temperature has to be explored by himself. The blade is too long, and the control of the heat is more important.

Ge Xiaohua was closer to the stove than usual, using his body to sense the temperature of the stove, not only with his eyes, but also with his heart, and because he was too close, the hair on his body was brushed a little, exuding a burnt smell.

"Sister Guo, look at Brother Hua, his body is almost burnt..." Not only the smell of burnt hair, but also the "smell" of barbecue appeared on Ge Xiaohua's body after a long time, which made the film crew very frightened. They all showed a bewildered expression, and some even rushed up to put out the fire with a fire extinguisher, but were stopped by Wang Dachui, and then asked the current highest leader, Guo Caixia, who hadn't gone back yet, and wanted to see Ge Xiaohua and Yamamoto Masaosu To what extent did the competition go.

"Don't move, let the No. 6 camera take special close-ups of Ah Hua, as well as the expressions of the people on the sidelines, all of which must be filmed!"

"understand!"

Although Guo Caixia was also worried, according to Ge Xiaohua's always cautious character, she would not engage in any illegal operations. This method should be used to better know the temperature of the stove. Although there are instruments to know, as a traditional blacksmith, Ge Xiaohua is very Clearly, a slight temperature change cannot be sensed by any sophisticated instrument, not to mention that this is a stove with thousands of degrees. Only the body can feel the temperature of the flame.

And in Kyoto, Japan, the blacksmiths there use their eyes to observe the temperature changes, but what you see may not be true, you can only know it by experiencing it yourself!

The extreme high temperature made Ge Xiaohua's skin burn. Enduring the severe pain, Ge Xiaohua didn't seem to care about all this at all, and was always paying attention to the situation of the furnace knife embryo.

"It's changed from red to blue! Out of the oven!" Ge Xiaohua took out the knife embryo with quick eyesight and quick hands. The spring water that had been prepared earlier was icy cold. Changes, rigidity, flexibility, durability and other aspects have reached a peak level. In the true sense, it is a seamless piece of "living steel"!

After the quenching was successful, Ge Xiaohua tore off the scorched clothes on his arm, and after removing it, a burn was clearly visible.

"Ge Xiaohua may be the biggest old enemy of our Japanese forging industry. This person is bold and cautious, and he actually senses the temperature of the furnace with his body. Even I can only stand far away and observe with my eyes." Yamamoto Masaosu knew that Ge Xiaohua had rich experience. , You can know when the best quenching time has been reached simply by your own eyesight, but in order to be more accurate, one second or even 0.5 seconds is added, so you dare to get so close, and use the distance of the barbecue to sense the stove with your arms The temperature has reached the level of scalding at this moment, and there is nothing wrong with it, so I continue to work.

"Tough guy!" This is not only Yamamoto Masaosu's evaluation, but also the staff present are all in admiration. They are cheering for Ge Xiaohua in their hearts. They dare not express it because they are filming, and the noise and some noisy emotions will affect Ge Xiaohua and Yamamoto Masaosu. showdown.

"Sister Guo! Don't enter the arena!" Seeing Guo Caixia's excited face, Wang Dachui grabbed Guo Caixia with scald ointment and prepared to rub it on Ge Xiaohua.

"Sledgehammer, what are you doing! Ah Hua, your arm is scalded and your skin is torn apart. Can't you see clearly?"

"Sister Guo, calm down, look at what Brother Hua is doing! He is forging! Although I have never forged iron, I can see that Brother Hua has entered a very special state at this moment. If you disturb him at this moment, then he All the damage I received just now was in vain!"

"Special state?" Guo Caixia calmed down and observed Ge Xiaohua who was working intensely on the forging table. There seemed to be a smile on his face, and he was not in pain, and his work efficiency was not weakened by the burn on his arm. .

"Yes, Brother Hua enjoys this process very much, and during this period of time, the weapon that Brother Hua will make will be the strongest! And Brother Hua is physically strong, this injury is just a tickle for him!" Wang Dahammer Although he is a few years older than Ge Xiaohua, he respects Ge Xiaohua very much, so he has always been called Hua Ge, and Guo Caixia is Ah Hua's pet name.

"Okay." Guo Caixia regained her true colors as a strong woman, standing on the sidelines seemingly calmly, but in fact her calves were shaking involuntarily. Although the frequency was not high, it was obvious that she was extremely anxious, and most people would have ignored her. Going forward, Guo Caixia was able to use reason to overcome impulsiveness, no loss is a leader.

"The quenching is completed, should it be polished?" Ge Xiaohua observed that Masaoshi Yamamoto took out his "secret weapon", such as whetstones and abrasive paper of different thicknesses.

Yamamoto Masaosu's set of grinding and polishing tools is like a work of art. It can be seen that after the quenching is completed, the first thing he thinks of is grinding and polishing the knife blank!

This work is extremely complicated and cumbersome, and it also tests patience, so Yamamoto Masaosu will spend half a month on polishing and polishing, and the next few days will be used to make scabbards, handles, decorations and other links.

"I'll make the handle and scabbard first, and put them away for a few days after polishing." Ge Xiaohua did not synchronize with Masaosu Yamamoto, but instead made the handle and scabbard. After making the handle, you can put it aside and wait for the knife After the embryo was polished and polished, it was installed. After all the production was completed, Ge Xiaohua did the polishing and polishing. It took three days to make the scabbard, handle, and decoration, and Masahiro Yamamoto was still polishing. He was rough grinding these days. The fine grinding seems to be the same as before, but Ge Xiaohua knows that this is just the beginning stage of grinding, repeating the same movement every day, and controlling the angle and strength has reached a terrifying level.

From the perspective of laymen, Masaosu Yamamoto is polishing the knife embryo leisurely. In fact, Ge Xiaohua knows that he is creating a work of art, creating a weapon that kills art in the true sense of the original plain knife embryo.

Ge Xiaohua finished making the scabbard, the handle, and decorated it with the scabbard. Although you can’t see anything now, you can understand that Ge Xiaohua and Yamamoto Masaosu are not building the same type of weapon. The length of the handle can be seen .

(End of this chapter)